Random thoughts on GPS: Using absolute vs. relative velocity zones
Suppose you are coaching two distance runners, one with MAS
(Maximum Aerobic Speed) of 18km/h and one with MAS of 21 km/h. The former is definitely
more aerobically fit and would crush the latter in most middle to long
distances (taking into account that threshold is proportional to MAS).
How would you approach their training and analysis of
training loads? Would you prescribe threshold pace (tempo runs) of the same
speed and distance to both, or would you take into account their individual differences
(MAS level)? In other words, would you say do 2x10min @80% MAS or would you say
2x3000m @80% MAS? Or even worse say run for 2x10min at 16km/h to both of them?
In the case where distance is prescribed the slower runner
will experience significantly higher workload. (Tip: This is why it is retarded
for up and coming runners to copy weekly mileages of high level runners – might
be more injury-proof to copy their time spent running although this might also
be too strenuous)
Taking this discussion a bit further – would you say they
were running at same intensity if
they were running at 15km/h for certain time? Of course not – intensity in this
case have to be expressed relatively to their abilities. In strength training
world we use %1RM to solve this dilemma.
Unfortunately, gold medals are not given to those who
express highest effort to their ability (“I got 11th place, but I
was running at 95% of my VO2max, while the guy that won run at 93% of his VO2max – that’s not fair!”)
– They are given to those who express highest effort absolutely. In endurance world, races are not 10min time trials, but
rather distances, like 5k, 10k and so forth. The winner is the one that covers
those distances in least time, not someone that run them at higher %MAS.
What this all mean? It means that athletes and coaches
should juggle both individual characteristics and distance demands (in this
case distance, terrain, etc). They should plan their training taking into
account both, but mostly leaning more toward individual characteristics at
least in running world. This is the dilemma that bother a lot of coaches in
team sports as I have alluded HERE.
Long story short – we prescribe training loads and analyze
those loads for a single-subject based on relative
indicators and compare individuals (give medals) based on absolute indicators. We need to take
into account both (again complementarity).
With the recent advances and spread of GPS tracking
technologies in team sports one stumbles on the same dilemma. The velocity
bands are prescribed absolutely and training/game[1]
effort is sometimes judged by distance/time covered at certain absolute zone. As
Martin would say “things are simply more complex”.
What I would love is to express some of my random thoughts
on this topic.
When it comes to training, coaches[2]
would love to know who really gave an effort and who was slacking. Some of them
would also love to know if the training stimuli is enough to stimulate
adaptation response in, for example, aerobic capacities. Some coaches prescribe
extra activities for certain players who didn’t spend certain time in certain [ABSOLUTE]
zone during team session [because they believe these were not pushing hard].
This might work as a motivator to the players, but it might
be short sighted. First of all, one needs to take positional demands for the
activity (in the match for example, position played affect physical aspects
more than individual characteristic) and one needs to take individual
characteristics. In other words taking into account law of demand and supply
(individual characteristics~positional demands).
Using absolute zones we ASSUME that demands were the same
for every player, we ASSUME that every player has the same needs for training
workload (e.g. time spend at certain zone to yield adaptation), we ASSUME that
every player can give the same amount of effort regardless of their individual
qualities. In my mind this is a lot of assumptions.
Prescribing time/distance spent in certain absolute velocity
bands as a training stimuli or quality/effort control is like saying to a
certain lifter that he needs to have 10 total reps over 160kg during a strength
workout, without noticing that his 1RM is actually 160kg. In squat. But today
he did bench press. But I digress.
So I believe that FOR THIS PURPOSE (workload analysis,
quality/effort control) one should use RELATIVE zones. But this is not without
problems. It is important to realize to there is no best way – don’t fall into the saying “if the only tool
you have is the hammer, everything starts to look like a nail”. Pick the right
analysis for the right job. In this case the task of analysis of individual
workloads might demands relative approach.
What should be those zones based on? One could use MAS and
MSS (Maximum Sprinting Speed) and ANR (Anaerobic Reserve; MSS – MAS). Or one
could use CV (Critical Velocity) and MSS. Or v3mmol (velocity at 3 mmol/L LA) or LT or whatever. I suggest using
one you could actually retest easily every once in a while. I like the approach
used by Buchheit et al. where they
used (Z1) <60% MAS, (Z2) 60-80% MAS, (Z3) 80-100% MAS, (Z4) 100% MAS to 30%
ASR, and (Z5) above 30% ASR.
In the study I quoted in footnotes they showed that players
with higher MAS covered LOWER distance at zones over MAS during a game. Were
they slacking? No. They were fulfilling the absolute positional demands by
stressing themselves less in relative terms. There is NO direct causality link
between being more aerobically fit and running more in a game. Being more
aerobically fit might mean that you are stressing yourself less and this might
yield less fatigue related errors in technique, etc. One thing to remember is
that regardless of MAS levels, distances below MAS were decreased in the second
half. So, even if one might increase his MAS, there still might be decrease in
distance covered over duration of the game. Again, simply very complex things. We
are still clueless what causes this – fatigue or tactical demands, or both.
When it comes to SSGs there might be a ceiling effect
[absolute indicators] or even a drop [relative], which mean that players with higher
MAS might spend less time/distance[3]
in higher intensity zones. We would need both cross and longitudinal studies to
confirm this idea.
What this might mean is that SSG might not be enough to provide
an overload for players with higher MAS. On the flip side it might also mean
that further increase in MAS might not yield any benefit in distance covered
during SSG/practices/games, so there is
no point in increasing it from that aspect. Simply more complex
Speaking of relative zones there also might be a question of
their practical use. For example, the MAS and ANR levels might not vary much
between players for a given team compared to Typical Error of GPS estimates. So
this comes to signal vs noise problem. We might utilize relative velocity zones
between players that vary around 0.5km/h, but typical error for GPS velocity estimates
might be around that value which questionable practical usability of relative
zones approach. It is beyond my statistical knowledge how to evaluate this. We
need more research on this and the recent paper by Martin Buchheit
is a move to a right direction.
Hope that this post got you thinking because things are
simply more complex. Use your brain and use the right analysis to get the job
done. IMHO, we need both relative and absolute approach for different purposes.
[1] It
is beyond the topic of this blog entry to discuss further implications of
individual characteristics (e.g. MAS) to game related performance (expressed in
both absolute and relative terms) so I am directing you to the papers by Martin
Buchheit et al., like Mendez-Villanueva,
A., Buchheit, M., Simpson, B. M., & Bourdon, P. C. (2013). Match play
intensity distribution in youth soccer. International Journal of Sports
Medicine, 34, 101– 110.
[2]
Coaches in team sports should stop worrying too much on the physical aspect of
the performance and training loads and worry more about skill acquisition IMHO.
A lot of them are pursuing blindly certain drills because players tend to spend
X amount of time in this/or that HR/Velocity zone, instead of worrying on what
are they trying to coach/teach group or individual (what
technical/tactical/team play aspect). In team sports SKILL and team effort kills,
especially in more skill related sports like soccer (this might be a discussion
on itself regarding the differences between sports when it comes to worrying on
physical performance aspects compared to skill acquisition aspects)
[3] I believe
this should be expressed as time instead of distance for the same reasons
outlined with two runners at the beginning of this blog post.
No comments:
Post a Comment